Quick note about silk fusion

Here's a link to photos of silk fusion "tiles" on facebook

The next casting installment is almost ready.....what to do when you are making a mold wider than the rollers in your pasta machine without spending all day with a rolling pin or brayer.

STEP 1: Preparing polymer clay for casting molds

This is the first of a series of tutorials for those interested in the details of making their own molds for casting paper. 

This method was developed specifically (by me) for working with calligraphy, but is adaptable to many sorts of designs. I've been refining and expanding it for many years and have taught many calligraphy guilds and at several international lettering arts conferences. To see some examples of papercastings, go to the gallery on my website:papercasting gallery

Polymer clay is an outstanding medium for making papercasting molds. It keeps fine detail, doesn't change at all when baked, and releases the paper cleanly without needing mold release agents which are usually non-archival.  Sculpey Premo has proved to be the best choice for this technique, due to its strength and flexibility. It is by far the most economical in 1 lb. bricks.

You will also need a roll of waxed paper on hand.

White is a good choice as your design will show up well and it is easy to tint with small bits of other colors when desired.

First of all, the clay must be "conditioned" as the various chemicals separate over time, and to make it more malleable. The easiest way is to break or cut it into chunks (no bigger than the little 2 oz packs) and hand them to your sons (who are watching a football game) to knead. The next easiest method is to warm and flatten in your hands until it will go through a pasta machine at the widest setting.

As you fold and re-roll it will gradually become softer and well-mixed. It is well worth the moderate expense of buying a pasta machine if you are going to work much with polymer clay, especially for casting molds that take thin layers which are very difficult to roll out by hand.
*You should not use a pasta machine for food if you use it for polymer clay.

If you are not sure of how much to condition it, try mixing colors and when the color is completely even you know you are done. Don't worry if it breaks into bits at first, smash it back together and keep rolling through.
Keep folding but never roll with the fold last as you can add air bubbles. Every time you roll you need to be conscious of avoiding getting air trapped between the layers - usually folding in thirds to enclose rough edges and rolling with the folds perpendicular to the rollers will work well. If you think you have a bubble, prick it with a pin. Even when your mold is almost done you can still do this and gently smooth over the pinhole.

Tinting is very useful for making complicated molds with various depths as the layers of color help guide you in figuring out which parts to cut out in each layer.

When it is nice and workable you can start dialing down to the thickness you want. Make a habit of always having waxed paper under your rolled clay.

Every time you move things around you want to move the waxed paper with clay on it, not lift (and stretch and deform) the clay you have so nicely rolled out. It also protects whatever is underneath, since an oily residue leaches out of the clay over time.

If you are making a mold with several layers you want to work the clay quite thin - usually the thinnest setting doesn't roll smoothly or hold together well enough, but about the second or third will do fine. For background layers or very bold designs you can stick with the thickest setting. It may take some experience with cutting to know for sure - it seems thicker when cutting than it did when rolling. Start with very clean and simple designs (*upcoming tutorial on choosing and adapting designs).

Next time: joining strips of clay to get a piece large enough for your casting design.


remember, live classes are available - go through the entire process; first a day of small projects to learn several techniques and see the results, then discuss how to plan successful casting projects using your own art and a day to do a big project with plenty of individual attention, classes that meet a third day (or half) get to see the test castings, learn how to fix problems in the mold, work with color, learn about 3-d possibilities, and more) -  click here for information on workshops

Bridal Show

December 29th was my first shot at being in a bridal show to spread the word about calligraphy for weddings and events.

One reason was that the News-Tribune Bridal Show at Capital Plaza was the first I've seen in the area that was not held on a Sunday.

My daughters were invaluable as designer (Bethany) and saleslady (Jenny). Kyle (son-in-law) was of major assistance getting the banner painted and hung. One of the fun things I did was write out people's name in white as a sample of the writing they could have on their invitations.

It was good to have a deadline to get new business cards, the banner, and an informative flier all done. Thank goodness for the banner, since we had all sorts of lighting equipment behind us! I'm currently working on a wedding monogram job that came from the show, we'll see what else happens as wedding dates get closer.

Resurrecting Rediscovered Art Part 2

Here's how it looked yesterday:

Resurrection of Rediscovered Art

 

While looking through unfinished works and old backgrounds, I rediscovered this version of the Proclamation on the Family. I had given up on it at one point, put it in a drawer, and forgotten completely. Pulling it out after several years made it easy to see why, I don't have a photo but it had become very dull as I had washed out the paints and made them all blend into the background and each other. So I set to work on it again, and think I am almost done this time. I added some writing, re-wrote some to liven the color back up, and have enjoyed getting back into it.

Welcome to my blog

This is a new thing for me, but hopefully will be a lot of fun to chronicle some of my art and art business activities, including showing works in progress, some hints and how-tos for those interested in papercasting or silk fiber work, and who knows what else!